MTP=Model Tapered Pipe Un-machined pipe fittings. Hole is cast in place
| Size | Elbow | Street ell | Elbow 45° | Tee | Cross | Coupling | 180° (working) | 180° (dummy) |
| MTP |
|
|
|
|
|
|
|
|
| 1/8" | $5.00 | $5.00 | $5.00 | $5.00 | $5.00 | $5.00 | N/A | $10.00 |
| 3/16" | $6.00 | $6.00 | $6.00 | $6.00 | $6.00 | $6.00 | $20.00 | $10.00 |
| 1/4" | $7.00 | $7.00 | $7.00 | $7.00 | $7.00 | $7.00 | $20.00 | $10.00 |
| 5/16" | $8.00 | $8.00 | $8.00 | $8.00 | $8.00 | $8.00 | $20.00 | $10.00 |
Description:
Miniature pipe fittings are lost wax bronze. Fittings are ready to
thread with Model Taper Pipe taps or die.
An alternative method is to silver solder pipe fittings. This method would
help save on costly pipe taps and dies.
Side view of 180° fittings with size comparison.
Dummy units are cored for tapping hole.
Working units are fully cored.