contact Bob Pedersen  email  livesteamparts@hotmail.com

90 Ton Baldwin mikado patterns & mold collection

This is a photo of the real locomotive that the patterns and molds are based from. 

Finished 2-8-2 90 Ton Baldwin built in 7 1/2" gauge using the castings from this collection of patterns.

Good looking locomotive that you can spend a lot of time adding detail to give it's own personality.
NOTE:  The finished locomotives shown in photos are not included. 

Details of collection

Category B = 1 1/2" scale 90 Ton Baldwin Mikado  7 1/2" or 7 1/4" gauge, patterns and molds collection for sale
pattern/mold number	basic part description	type of pattern	method of use	cores used	can pour material in	photos of the 90 Ton sand patterns
FW-2	drive wheel	wood pattern	sand		cast iron
FW-3	drive wheel	wood pattern	sand		cast iron
FW-4	pilot/trailing wheel	wood pattern	sand		cast iron
FW 1-02	firedoors	wood pattern	sand		cast iron
FW 1-03	firedoor frames	wood pattern	sand		cast iron
FW 5-04	pedestals	wood pattern	sand		cast iron
FW 5-05	axlebox tender	wood pattern	sand		cast iron
FW 5-07	Tender wheel	wood pattern	sand		cast iron
FW 5-15	brake shoe ring	wood pattern	sand		cast iron
FW21-01	frame, valve gear	wood pattern	sand		cast iron
FW21-02	frame, valve gear in	wood pattern	sand		cast iron
FW21-13	reverse shaft bearing	wood pattern	sand		cast iron
FW3-2	smokebox cover	wood pattern	sand		cast iron
FW3-3	smokebox door	wood pattern	sand		cast iron
FW3-4	stack	wood pattern	sand	X	cast iron
FW3-7	steam dome bottom	wood pattern	sand		cast iron
FW3-8	steam dome cover	wood pattern	sand		cast iron
FW3-9	sand dome bottom	wood pattern	sand		cast iron
FW3-10	sand dome cover	wood pattern	sand		cast iron
FW3-13	sand dome lid	wood pattern	sand		cast iron
FW4-26	frame deck	wood pattern	sand		cast iron
FW8-2	brake shoe ring	wood pattern	sand		cast iron
TV18-1	cylinder/saddle half	wood pattern	sand	X	cast iron
TV18-10	pivot/spreader/valve	wood pattern	sand		cast iron
TV18-5	pilot beam/axleboxes	wood pattern	sand		cast iron
TV18-6	tender truck parts	wood pattern	sand		cast iron
TV18-7	main axlebox	wood pattern	sand		cast iron
TV18-8	valve cover/liner	wood pattern	sand	X	cast iron
TV18-9	cylinder caps/piston	wood pattern	sand		cast iron
21-05	link frame	aluminum mold	lost wax process		bronze
20-22	crosshead	aluminum mold	lost wax process		bronze
02-09	spring clip	rubber mold	lost wax process		bronze
06-01	brake hanger	aluminum mold	lost wax process		bronze
02-03	main spring hanger	aluminum mold	lost wax process		bronze
08-20	brake shoe	aluminum mold	lost wax process		bronze
02-12 & 02-18	equalizer beam	aluminum mold	lost wax process		bronze
02-21	rear spring hanger	aluminum mold	lost wax process		bronze
02-19	equalizer hanger	aluminum mold	lost wax process		bronze
Lost wax injection molds for the 90 Ton mikado that make the bronze parts.
200 drawings included for building the 90 Ton mikado locomotive.  The patterns are well built.  In very good shape.  I have taken good care of the patterns.  Come on down and look for yourself before buying.
Please note:  the C-2048 front coupler pocket pattern belonged to the heavy mikado collection and has been sold.
The castings and parts all fit on two 48" long x 24" wide x 6' tall office depot shelving units.  The shelving units are included. You could start building a locomotive and still have extra parts to start selling with.
Everything should fit in a 3/4 ton Pickup truck full bed and/or bring small U-haul trailer.  I'll supply boxes for transport if you need them. Just let me know when you want to drive down and check out the collection in person.  Hotels are available in Carson City, Nevada 7 to 12 miles away. Major Airport is in Reno, Nevada.  35 minute easy highway drive to Mound House.  Car rental available at Airport. I have retired from the hobby so everything is up for sale.  Time to pick up items now while the weather is good.  Don't let this deal pass you up.
90 Ton Mikado patterns collection + castings = $21,500.00 or best offer.  Terms: cash & carry    Bring cash, truck with small Uhaul trailer, and I will help load it up. I will be happy to provide any training and share some knowlege.  I will show you how to inject the lost wax molds or answer any questions about the foundry process. If interested, make appointment to see in person.  email livesteamparts@hotmail.com

  

 

Back to collection

subject to change without notice.